"How much will the embroidery cost?" is the first question most people ask — and the honest answer is: it depends on what you choose. Two embroidery projects on the same kurti can cost very differently depending on the type of work, how much of it, and whether it's hand or machine. Understanding what drives custom embroidery cost lets you estimate roughly where your project sits — and adjust your choices to fit your budget.
There's no fixed price tag, because embroidery is a made-to-order service shaped by your design. But the factors that push the price up or down are few and clear, and once you know them, the cost stops being a mystery.
This guide breaks down what affects custom embroidery cost — the design choices that raise or lower it, and how to plan embroidery to your budget. At Tailoes, the exact cost is confirmed at a doorstep consultation before any work begins.
Custom embroidery cost is driven by five factors: the type of work (light thread work costs less than dense zardozi or aari/maggam), how much area it covers (an accent costs far less than all-over), the density and intricacy of the design, whether it's hand or machine (hand costs more), and the materials used. Because it's tailored to your design, there's no single price — the exact cost is confirmed at consultation once the design is agreed. Tailoes quotes upfront, before any work begins.
Key Takeaways
- Type of work: light thread work is cheapest; zardozi and aari/maggam cost most.
- Coverage: a neckline accent costs far less than all-over embroidery.
- Density & intricacy: finer, denser designs take more time, so cost more.
- Hand vs machine: hand-work costs more; machine is more economical.
- You control the cost: simpler type, less coverage and machine work keep it down.
Why Embroidery Has No Fixed Price
Unlike buying a ready-embroidered outfit with a set price, custom embroidery is a service — the cost reflects the specific work your design needs. A light thread motif at the neckline and a dense zardozi yoke are wildly different amounts of skilled labour, even on the same garment. The price follows the work, not just the fact that you want "embroidery."
This is actually good for your budget, because it means the cost is largely within your control. By understanding what drives custom embroidery cost, you can steer your choices — a simpler type, a smaller area, machine over hand — to land where you want. And because it's quoted after the design is agreed, you always know the figure before committing.
The Five Factors That Set the Price
Almost every embroidery quote comes down to five things. Type of work: light thread work is the most economical; zardozi, aari and maggam are premium. Coverage: how much of the garment the embroidery spans — an accent vs all-over. Density and intricacy: how fine and packed the design is. Method: hand-work is more expensive than machine. And materials: metallic threads, beads, sequins and stones add to the base cost.
Every quote is really these five factors added up for your specific project. The more of them that lean "heavy" — dense hand zardozi all over in premium materials — the higher the cost; the more that lean "light" — a simple machine thread accent — the lower. Knowing this lets you predict roughly where your project sits before you even book.
What Pushes Embroidery Cost Up or Down
| Factor | Lower Cost | Higher Cost |
|---|---|---|
| Type of work | Thread work | Zardozi, aari/maggam |
| Coverage | Neckline / sleeve accent | All-over |
| Density | Light, spaced motifs | Dense, intricate |
| Method | Machine | Hand |
| Materials | Standard thread | Metallic, beads, stones |
Each Cost Factor, Explained
1. The Type of Work
The biggest driver. Light thread work is the most economical technique; sequin and mirror work sit in the middle; zardozi, aari and maggam are premium because they're intricate, dense hand-work. Choosing the type sets the baseline for everything else, so it's the first place to think about budget.
2. How Much It Covers
Coverage scales the cost directly. A small neckline or sleeve accent uses a fraction of the work of borders or yokes, which in turn cost far less than all-over embroidery. If budget matters, keeping the embroidery to a well-chosen accent gives impact without the price of covering the whole garment.
3. Density & Intricacy
Even within the same type and area, a light, spaced design costs less than a dense, highly detailed one — because density is time, and time is cost. Intricate, packed patterns take far longer to execute, especially by hand. Simplifying a design or spacing it out is an easy way to reduce cost without changing the type.
4. Hand vs Machine
Method significantly affects price. Hand embroidery is more expensive because it's skilled, time-intensive labour — but it delivers the finest, most customisable detail. Machine embroidery is faster and more economical, ideal for simpler or repeat designs. Choosing machine where the design allows is one of the biggest levers on cost.
5. The Materials
Standard threads are the most economical; metallic threads, beads, sequins, stones and specialty materials add to the cost. A design that leans on rich materials will cost more than the same layout in plain thread. Material choice is another dial you can turn to fit a budget without abandoning the look entirely.
How to Keep Embroidery Affordable
- Choose a lighter type — thread work over zardozi or aari.
- Keep coverage to an accent — neckline or sleeves, not all-over.
- Simplify the design — lighter density costs less.
- Use machine where possible — for simpler or repeat work.
- Go easy on premium materials — standard thread over heavy stone/bead work.
Roughly Where Different Projects Sit
Lower end: a light machine thread-work accent at the neckline or sleeves — minimal area, simple design, standard thread. The most budget-friendly embroidery.
Mid range: sequin or mirror work over a border or yoke, or moderate thread work with some detailing — more area and materials, a step up in cost.
Higher end: dense zardozi or aari/maggam hand-work, all-over or on a bridal piece, in premium materials — the most skilled labour and richest materials, so the highest cost.
How to Get an Accurate Quote
| Do This | Why It Helps |
|---|---|
| Know the type you want | Type is the biggest cost factor |
| Decide the coverage | Accent vs all-over changes the price hugely |
| Share the garment/fabric | Fabric and design affect the quote |
| State your budget | Lets the tailor suggest options to fit it |
| Get it quoted at consultation | The only way to an exact figure |
Frequently Asked Questions
What makes custom embroidery cost more or less?
Five factors: the type of work (thread is cheapest, zardozi and aari/maggam are premium), how much area it covers (accent vs all-over), the density and intricacy of the design, whether it's hand or machine (hand costs more), and the materials (metallic, beads and stones add cost). The more of these that lean heavy, the higher the price.
Is thread work cheaper than zardozi?
Generally yes. Thread work (resham) is the most economical technique, while zardozi is premium metallic hand-work that's intricate and time-intensive, so it costs considerably more. If budget is a priority, thread work gives you embroidery at the most accessible end; zardozi is best reserved for bridal or grand pieces where the richness is the point.
Does all-over embroidery cost a lot more than a neckline design?
Yes — coverage scales the cost directly. A neckline or sleeve accent uses a fraction of the work of all-over embroidery, so it's far more economical. If you want the impact of embroidery on a budget, a well-placed accent is the smartest choice; all-over work is the most expensive because it covers the whole garment.
Can I get embroidery done within a specific budget?
Often yes — because the cost is driven by choices you control, a tailor can usually suggest ways to fit your budget: a lighter type, less coverage, a simpler design, machine over hand, or standard materials. Share your budget at the consultation and ask for options; that's the best way to land on something affordable.
Why can't you give an exact price online?
Because the cost depends on your specific design and garment — the type, coverage, density, method and materials all vary, and often the fabric needs to be seen. An accurate figure comes from discussing the design at the consultation, where the exact cost is confirmed before any work begins. This avoids both under- and over-quoting.
Written by the Tailoes Styling & Tailoring Team — doorstep stylists and tailors who plan and quote custom embroidery for women across Bangalore. This guide reflects the real factors we weigh when pricing embroidery, and how we help clients fit a design to their budget.
How Two Embroidery Projects Can Cost Differently
Take two clients. The first wants a simple thread-work motif at the neckline of a cotton kurti — one small area, light density, machine work, standard thread. It sits comfortably at the affordable end. The second wants dense zardozi across the yoke and sleeves of a bridal blouse, by hand, with metallic thread and beads. That's premium type, more coverage, high density, hand-work and rich materials — every factor leaning heavy, so it costs far more. Same "embroidery" service, very different quotes — because the work behind each is completely different. Seeing both makes it clear why the price always depends on the design.
The Cost Lever You Control
The useful thing to realise is that embroidery cost isn't fixed and imposed on you — it's largely shaped by your own choices. Type, coverage and method are the three biggest levers, and all three are yours to set. Want it cheaper? Lighter type, smaller area, machine work. Want the showpiece regardless? Then you accept the higher figure for the premium hand-work. Either way, you go in informed — and a good tailor will always show you where the cost is coming from and how to adjust it to your budget.
Get Your Embroidery Design Quoted
The only way to an exact price is to discuss your design. Explore the Women's Embroidery service — with doorstep consultation and stitching across Bangalore. Book a consultation, share your design and budget, and we'll confirm the exact cost before any work begins.
Conclusion
Custom embroidery cost comes down to five factors: the type of work, how much it covers, its density, hand vs machine, and the materials. Light thread accents by machine are the most affordable; dense zardozi or aari/maggam hand-work, all-over in premium materials, is the most expensive — because it's simply more skilled work.
The price isn't fixed, which means it's within your influence: choose the type, coverage and method that fit your budget, share the design for an accurate quote, and you'll always know the cost before committing. With Tailoes, every embroidery project is quoted upfront at your doorstep — before any work begins.
Last updated: September 2026